Aircraft Ceramic Coating at KONT
A coating is a thin sacrificial layer bonded to the finish. It does not make an airframe self cleaning, and anyone who says otherwise is selling something. What it does is make the next wash faster and stop contamination grabbing as hard.
Joel Espiritu does it at your hangar or ramp spot at Ontario International Airport, about 50 minutes from Pasadena, California. Overnight and after hours, so the aircraft is never off the line during the day.
- Service
- Aircraft Ceramic Coating
- Field
- KONT Ontario International Airport
- Location
- Ontario, San Bernardino County, CA
- From Pasadena
- About 50 minutes
- Hours
- 24 hours, Mon to Sat. Closed Sunday
- Estimate
- Free, by phone
What Ontario does to an airframe
The Inland Empire is the hottest and dustiest environment in this service area. Summer surface temperatures are severe, and the wind through the Cajon and Banning passes carries fine grit that gets into everything. Interiors here fill with dust faster than anywhere else, and exterior work has to be timed for temperature to be done properly at all.
More on the field itself, the based fleet, and access is on the KONT Ontario International Airport page.
What aircraft ceramic coating means at KONT
Long-term paint protection that cuts wash frequency and holds gloss.
A coating buys back time between washes and makes bugs and exhaust release instead of grabbing.
Sustained UV at this field chalks paint and fades plastics, and coating is the cheapest thing that slows it down.
Coated paint releases grit far more readily, which matters here because dry wiping a dusty airframe is how swirl gets into the finish.
How a job at KONT runs
Coating is the one service that cannot be rushed. The surface has to be washed, decontaminated, corrected where needed, and fully dry before anything is applied, and it needs undisturbed cure time afterward. That means booking a window rather than squeezing it between legs.
Call or text with the aircraft type and where it sits on the field. Free estimate, usually the same day, and one price for the work discussed. Joel does not pack up until you or your crew have walked it.
Other services at KONT
Private Jet Detailing
at KONT
Aircraft Interior Detailing
at KONT
Aircraft Exterior Detailing
at KONT
Brightwork & Metal Polishing
at KONT
Aircraft Ceramic Coating at other California airports
Aircraft Ceramic Coating at KONT
Do you do aircraft ceramic coating at KONT?
Yes. Ontario International Airport is about 50 minutes from Pasadena, California, and Joel works at your hangar or ramp spot rather than at a shop. Tell him the aircraft type and where it sits and the estimate is free.
Can the work happen overnight at KONT?
Yes, and that is the normal booking. Hours are 24 hours Monday through Saturday and closed Sunday, so an aircraft that lands in the evening is finished before the morning departure. Give Joel the departure time and the job is planned backward from it.
How much does aircraft ceramic coating cost at KONT?
There is no flat rate, because airframe size, condition, and scope all move the number. Estimates are free and given by phone after a few questions. A deposit confirms the booking and comes off the final price.
Why does aircraft ceramic coating matter more at KONT?
Sustained UV at this field chalks paint and fades plastics, and coating is the cheapest thing that slows it down.
Aircraft Ceramic Coating at KONT, on your schedule
Usually answered the same day. Overnight and short notice work available six days a week.
Cash · Venmo · Zelle · Card (Square, coming soon)